 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Product Brief PMB 6258 SMARTi DC+ E D G E R F Tra ns ce i v e r S M A R T i D C + is the first proven EDGE RF transceiver solution in high volume production offering outstanding RF performance for GPRS and EDGE. It is Infineon Technologies 4th generation of the widely successful SMARTi family of single chip radio transceivers. SMARTi DC+ is a EDGE quad-band (GSM850/900/1800/1900) radio transceiver supporting worldwide roaming. With SMARTi DC+ all functions required for a cost and board space optimized state of the art EDGE radio are integrated. All variants of a GSM product family from high end EDGE to low end speech only can be realized with the same radio design, answering the needs of time to market. SMARTi DC+ is entirely controlable through a 3 wire bus and offers a standard I/Q interface to a wide variety of BB solutions. In combination with Infineons S-GOLD EDGE BB Modem a compact system approach can be achieved, which results in a very cost effective EDGE solution. Applications Te ch n o l o g y Based on Infineons proven B9c 0.25 m BiCMOS Technology Supply Voltage 2.6 V - 2.8 V P-VQFN-48 Package (7 x 7 mm) GSM/GPRS Quad-Band Mobile Phones and Data Modems Full EDGE capability in transmit and receive mode Direct Conversion Receiver with integrated channel filtering 26 MHz VCXO integrated Automatic DC offset compensation Programmable DC output level Excellent Low Noise Directmodulator for EDGE and GSM EDGE Quad-Band Mobile Phones and Data Modems Features Full Quad-Band solution for GSM850/900/1800/1900 with integrated LNAs for worldwide roaming Full integration of RF VCO SAM Fast lock PLL for GPRS class 12 Multiplexed I/Q lines Simple programming with 3 wire bus Using Infineons EDGE VGA (PMB2259), completes the linear RF EDGE line up www.infineon.com/mobilesolutions Mobile Solutions Never stop thinking. Product Brief Infineons EDGE Quad-Band solution using SMARTiDC+ (PMB 6258), VGA/Driver (PMB 2259) and S-GOLD (PMB 8870). S-GOLD (PMB 8870) SSC IR Memory I2S I2S/DAI Dig. Mod Timer GSM Cipher Unit FLASH/SRAM EDGE HW Accelerator OakDSPCore(R) Headset MUX Ringer Earpiece A A D D Speach and Channel Decoding D Equalizer D A I A A Q CLK DAT ENA RF Control AFC I2S 26 MHz AFC A SMARTi DC+ (PMB 6258) Automatic Offset Compensation GSM850/1900 GSM900/1800 850 900 1800 1900 A D Speach and Channel Encoding D GMSK/8PSK Modulator D 1 4 7 * 2 5 8 0 3 6 9 # USARTs Keypad Fast IrDA USB MiniHost USIM Display IF GPIOs DMA RTC SRAM VIC ECO GSM Timer GEA-1/2 CAPCOM Timer Control Logic SAM Fast PLL 850 900 VGA Driver (PMB 2259) Rx/Tx 1800 1900 ARM 926 EJ-S RF Control SSCs MMC AUX ADC JTAG (R) Multi Mode PA Note: OakDSPCore (R) is a registered trademark of ParthusCeva, LTD. ARM (R) is a registered trademark of ARM, Ltd. How to reach us: http://www.infineon.com Published by Infineon Technologies AG, St.-Martin-Strasse 53, D-81669 Munchen (c) Infineon Technologies AG 2004. All Rights Reserved. Attention please! The information herein is given to describe certain components and shall not be considered as a guarantee of characteristics. Terms of delivery and rights to technical change reserved. We hereby disclaim any and all warranties, including but not limited to warranties of non-infringement, regarding circuits, descriptions and charts stated herein. Information For further information on technology, delivery terms and conditions and prices please contact your nearest Infineon Technologies Office. Warnings Due to technical requirements components may contain dangerous substances. For information on the types in question please contact your nearest Infineon Technologies Office. Infineon Technologies Components may only be used in lifesupport devices or systems with the express written approval of Infineon Technologies, if a failure of such components can reasonably be expected to cause the failure of that life-support device or system, or to affect the safety or effectiveness of that device or system. Life support devices or systems are intended to be implanted in the human body, or to support and/or maintain and sustain and/or protect human life. If they fail, it is reasonable to assume that the health of the user or other persons may be endangered. Template: pb_tmplt.fm/4/2004-01-01 Published by Infineon Technologies AG Ordering No. B113-H8014-G1-X-7600 Printed in Germany PS 01042. NB |
Price & Availability of PMB6258
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |